- Remove the lid from the tank
- Shut off the water by turning the shut-off valve clockwise
- Drain as much water out of the tank as possible by holding the flush lever down until the toilet is completely flushed.
- Sponge or towel out any remaining water in the tank. A shop vac also works well.
- Disconnect the water supply tube or hose that connects the water supply valve to the fill valve
- Beneath the tank, loosen the lock nut that holds the fill valve to the tank.
- Remove the old fill valve.
- The new fill valve will go on similarly to how the old one came off.
- Reattach the new fill valve and adjust the float to connect height according to the manufacturer's instructions.
- Attach a new refill tube to the overflow pipe
- Reattach the water supply tube or hose to the tank
- Turn on the water, test the new fill valve and check for leaks
Articles dans cette section
- Comment installer ou remplacer l'inverseur de mon robinet ?
- Comment puis-je installer ou remplacer un cartouche?
- Comment retirer ou installer la poignée de mon robinet?
- Comment hiverner des toilettes à gravité ?
- Comment identifier le débit d'aérateur de votre robinet ?
- Comment installer et régler le poids d'un tuyau de douchette
- Comment installer la cartouche de contrôle du volume pour mon système de douche thermostatique 1/2 po ?
- Comment installer le matériel de montage pour un robinet de cuisine ?
- Comment installer ma douchette de cuisine ?
- Comment installer ou remplacer l'adaptateur en Y pour mon robinet de cuisine ?
- Afficher plus
Commentaires
Vous devez vous connecter pour laisser un commentaire.